Description
MN4115 antifreeze — latest-generation lobrid coolant
The MN4115 antifreeze is Mannol’s AF13++, an environmentally friendly, high-tech premium lobrid (low-hybrid) concentrate of the latest generation. It is designed for all-year-round use in every modern cooling system where a mono-ethylene glycol-based antifreeze is recommended.
Lobrid technology is what the newest European engines ask for. If your car specifies a G13-type coolant, this is the class of product it needs.
Two-stage corrosion protection
The MN4115 antifreeze protects brass, copper, alloyed steel, cast iron and aluminium excellently against all forms of corrosion. It also prevents high-temperature corrosion on the aluminium surfaces of modern engines.
Its clever additive design works in two stages: the inorganic package protects surfaces immediately, while the organic component activates where corrosion spots form. That gives maximum protection from the moment you fill, and it already works at concentrations as low as 30%.
Stable, clean and long-lasting
This coolant has outstanding thermal stability and excellent thermal conductivity, and it resists foaming. It prevents limescale deposits that choke radiators and heater cores.
The MN4115 antifreeze is neutral to gaskets and hoses and compatible with all rubber and plastic cooling-system parts. It resists hard water well, and its inhibitor depletion rate is very low, so the protection lasts.
Clean formula, five-year life
It is a low-silicate liquid with no nitrates, phosphates or amines — NAP-free and based on Organic Acid Technology. Mannol states a minimum service life of 5 years.
The balanced additive package keeps the solution stable for its whole life, and Mannol states it exceeds the requirements of international standards and most European vehicle manufacturers. Always follow the instructions in your car’s operating manual when mixing and filling.
Fitment
The MN4115 antifreeze is recommended for passenger car engines and modern commercial vehicle engines that need a lobrid / G13-type coolant. Coolant specs are strict on newer cars, so confirm before ordering.
Send us your car model and year on WhatsApp. We will check the coolant specification your manufacturer demands and confirm this bottle is right before dispatch.
Mixing and topping up
As a concentrate, the AF13++ must be diluted with clean water before use — a 50:50 mix is the common workshop standard, and protection is already effective from 30%. Never run it neat, and never top up a lobrid system with an older silicate-heavy coolant.
If your car has lost coolant, find the leak first rather than only topping up. Once filled with the MN4115 antifreeze mix, run the engine with the heater on, let the level settle, and re-check it after the first drive so air pockets are fully bled out.
In the box
You get one sealed 1 litre bottle of Mannol Antifreeze AF13++ red concentrate, exactly as shown in the photos. The price for this bottle is ₹899.
Why buy from Partgin
Partgin confirms fitment by model or VIN on WhatsApp before payment, so your cooling system gets the correct chemistry. We accept COD and UPI, and we deliver pan-India to owners, workshops and retailers.
If the MN4115 antifreeze is not the coolant your car specifies, we will say so before taking your money and point you to the right one.
Frequently asked questions
What is the difference between AF13++ and AF12+?
AF13++ is a lobrid coolant — a low-hybrid mix of organic and inorganic inhibitors made for the latest engines. AF12+ is a full OAT coolant. Use the type your car manufacturer specifies; ask us if unsure.
Is this ready to use?
No, it is a concentrate. Dilute it with water to your manufacturer’s ratio before filling — protection starts at a 30% mix.
Can I mix it with my existing coolant?
Mixing different coolant technologies is not recommended. If your system runs a different type, a full drain and refill is the safe route — message us and we will advise.
Useful links: Shop All Parts · Car Parts · Mannol official website
Product Details
- Product code: MN4115
- Coolant type: Lobrid (low-hybrid) concentrate
- Colour: Red
- Pack size: 1 L
- Technology: Lobrid — inorganic + organic (OAT) inhibitors, low-silicate, NAP-free (no nitrates, phosphates, amines)
- Recommended for use: Passenger cars and modern commercial vehicles requiring a latest-generation (G13-type) mono-ethylene glycol coolant; manufacturer states it exceeds international standards and most European vehicle maker requirements
- Effective anti-corrosion protection from 30% concentration (manufacturer data)
- Service life: minimum 5 years (manufacturer data)








Reviews
There are no reviews yet.