Description
6PK970 fan belt — Gates Micro-V ribbed drive belt
The 6PK970 fan belt is a Gates Micro-V ribbed drive belt, Gates catalogue number 8606-00970. It is the serpentine belt that carries drive from the crankshaft pulley to the engine’s accessories, such as the alternator and the air-conditioning compressor.
The size code is printed on the sleeve and on the belt itself: 6 ribs in the PK profile and 970 mm of belt length. This genuine Gates belt in its sealed sleeve is priced at ₹599.
What this belt does
On engines with a short accessory drive, one compact belt does all the work. The 6PK970 fan belt keeps the alternator charging the battery and the compressor cooling the cabin every time the engine runs.
Its six ribs sit deep in the pulley grooves, spreading the load over a wide contact area. That grip is what stops the squeal and slip that a worn or stretched belt makes under load.
Signs your belt needs changing
Belts usually warn you before they fail. A squeal on a cold start, or a chirp when the air-conditioning switches on, is the classic first sign of a glazed or slack belt.
Check the ribbed side for cracks, frayed edges or missing chunks of rib, and the back for a shiny, polished look. A snapped belt stops charging and cooling support at once, so change a doubtful belt before a long trip.
Benefits of a genuine Gates belt
Gates supplies belts to vehicle makers, and this 6PK970 fan belt is built exactly to the published size — 6 ribs, 970 mm long, about 21 mm wide. The correct length keeps the automatic tensioner working in its proper range.
The polyester tensile cord holds the belt’s length stable through its service life, so it does not stretch and start slipping. The sleeve also carries Gates’ OE Quality mark, your sign that the belt meets original-equipment standards.
Fitment
This belt fits cars whose accessory drive is built for a 6-rib, 970 mm PK belt — the source listing gives no single model list, because the same size is used across different makes and engines. The only safe check is the code printed on your old belt.
Do not order by rib count alone: a 6-rib belt of the wrong length will not fit. Send us your model, year and engine on WhatsApp, or a photo of the code on your old belt, and we will confirm the 6PK970 fan belt before you pay.
In the box
You get one Gates 6PK970 fan belt (8606-00970) in its sealed Gates Micro-V sleeve, exactly as shown in the pictures. While the belt is off, spin every pulley by hand — a rough tensioner or idler bearing should be changed at the same time.
Why buy from Partgin
Partgin confirms fitment by part number, model or VIN on WhatsApp before payment. We accept Cash on Delivery and UPI, and we deliver pan-India to owners, workshops and retailers.
If your car uses a different belt size, we will tell you before dispatch rather than send a belt that cannot be fitted.
Useful links: Shop All Parts · Belt drive parts and car parts · Gates official website
Frequently asked questions
What do the numbers 6PK970 mean?
6 ribs, PK rib profile, 970 mm length. Match all three to the code on your old belt — the same rib count with a different length will not fit.
Is this the same as Gates 8606-00970?
Yes. 8606-00970 is the Gates catalogue number for the 6PK970 Micro-V belt in this listing.
Should I change the tensioner with the belt?
Not always, but always check it. A weak tensioner or rough idler bearing wears a new belt quickly, so workshops inspect both during a belt change.
Product Details
- Belt type: Micro-V ribbed (serpentine) drive belt
- Ribs: 6
- Pack size: 1 belt
- Product code: 6PK970
- Listed approvals: None stated
- Performance level: Gates Micro-V, original-equipment standard (sleeve marked OE Quality)
- Recommended for use: Cars whose accessory drive takes a 6-rib, 970 mm PK belt — match the code on the old belt (per source listing: “Suitable for Cars”)
- Belt length: 970 mm
- Belt width: 21 mm
- Number of ribs: 6
- Tensile cord material: Polyester
- Belt material: Elastomer








Reviews
There are no reviews yet.