Description
5PK1123 fan belt — Gates Micro-V ribbed drive belt
The 5PK1123 fan belt is a Gates Micro-V ribbed drive belt, Gates catalogue number 8605-01123. It is the serpentine belt that drives the engine’s accessories — alternator, air-conditioning compressor and other pulleys — from the crankshaft.
The size code is printed right on the sleeve: 5 ribs in the PK profile and 1123 mm of belt length. This genuine Gates belt in its sealed sleeve is priced at ₹249.
What this belt does
Many engines run their whole accessory drive on one belt, and narrower 5-rib drives are common on smaller cars. The 5PK1123 fan belt transfers crankshaft rotation to the alternator that charges your battery and the compressor that cools your cabin.
Its five ribs seat deep in the pulley grooves, giving the contact area needed to drive those loads without slipping. Gates builds the Micro-V range to original-equipment standards for exactly this job.
Signs your belt needs changing
A worn belt normally gives warning before it lets go. Squealing on a cold start, or a chirp when the air-conditioning cuts in, points to a glazed or slack belt slipping on its pulleys.
Also look for cracks across the ribs, frayed edges, missing rib chunks or a shiny polished surface on the belt’s back. If the belt snaps, charging and cooling support stop together — so replace a doubtful belt before a long drive, not after.
Benefits of a genuine Gates belt
Gates is an original-equipment belt maker, and this 5PK1123 fan belt is made exactly to the published size — 5 ribs and 1123 mm long. The correct length keeps the automatic tensioner sitting in its designed working range.
The polyester tensile cord keeps the belt’s length stable over its service life, so it does not stretch and begin to slip. The sleeve carries Gates’ OE Quality mark, and the code printed on the packaging matches the code on the belt.
Fitment
This belt fits cars whose accessory drive is built for a 5-rib, 1123 mm PK belt — the source listing gives no single model list, because one belt size serves many makes and engines. The only safe check is the code printed on your old belt.
Never order by rib count alone, and never stretch a shorter belt onto the pulleys. Send us your model, year and engine on WhatsApp, or a photo of your old belt’s code, and we will confirm the 5PK1123 fan belt before you pay.
In the box
You get one Gates 5PK1123 fan belt (8605-01123) in its sealed Gates Micro-V sleeve, exactly as shown in the pictures. While the belt is off, spin each pulley by hand — a rough or noisy tensioner or idler bearing should be renewed at the same time.
Why buy from Partgin
Partgin confirms fitment by part number, model or VIN on WhatsApp before payment. We accept Cash on Delivery and UPI, and we deliver pan-India to owners, workshops and retailers.
If your car uses a different belt size, we will tell you before dispatch rather than send a belt that cannot be fitted.
Useful links: Shop All Parts · Belt drive parts and car parts · Gates official website
Frequently asked questions
What do the numbers 5PK1123 mean?
5 ribs, PK rib profile, 1123 mm length. Match all three to your old belt — a belt with the same rib count but a different length will not fit.
Is this the same as Gates 8605-01123?
Yes. 8605-01123 is the Gates catalogue number for the 5PK1123 Micro-V belt in this listing.
Can I fit a 6PK belt instead of this 5PK?
No. The rib count must match the pulley width exactly — a wider belt will not seat correctly. Order the code printed on your old belt.
Product Details
- Belt type: Micro-V ribbed (serpentine) drive belt
- Ribs: 5
- Pack size: 1 belt
- Product code: 5PK1123
- Listed approvals: None stated
- Performance level: Gates Micro-V, original-equipment standard (sleeve marked OE Quality)
- Recommended for use: Cars whose accessory drive takes a 5-rib, 1123 mm PK belt — match the code on the old belt (per source listing: “Suitable for Cars”)
- Belt length: 1123 mm
- Number of ribs: 5
- Tensile cord material: Polyester
- Belt material: Elastomer








Reviews
There are no reviews yet.