Jeep Compass Petrol Thermostat Elbow – Coolant Outlet Housing (JCPE)

Buy the JCPE thermostat elbow — a cast aluminium coolant outlet elbow for the Jeep Compass petrol, with a machined sealing flange and O-ring groove. Send us your model year on WhatsApp and we will confirm fitment before you pay.

₹1,999.00

Description

JCPE thermostat elbow for Jeep Compass petrol

The JCPE thermostat elbow is the coolant outlet housing that connects the thermostat area of the Jeep Compass petrol engine to the radiator hose. It is a cast aluminium elbow with a tall hose outlet, a machined side flange and a sealing O-ring, exactly as shown in the photos.

Coolant housings live a hard life — constant heat cycles, pressure and coolant chemistry. When the original elbow corrodes, warps or starts weeping, this is the replacement that restores a proper seal.

What this part does

Engine coolant leaves the block through the thermostat housing and elbow on its way to the radiator. The JCPE thermostat elbow forms that outlet: the hose pushes onto its tall neck, and its machined flange bolts down flat so the joint stays sealed under pressure.

The flat-milled flange face and the O-ring groove are the details that matter. A housing that is even slightly warped will seep coolant no matter how new the hose or clamp is.

When to replace it

Look for pink or green coolant crust around the housing, a slow coolant level drop, dampness under the elbow, or overheating warnings. On ageing Compass petrol models, the original housing area is a known place for seepage as the sealing surfaces degrade.

Replacing the elbow while the cooling system is open is the economical moment to do it. Fitting the JCPE thermostat elbow with a fresh seal and correct coolant refill prevents repeat leaks and protects the engine from low-coolant overheating.

Fitment

This elbow is listed for the Jeep Compass petrol, as per the source listing. Engine bays differ between model years and variants, so confirm before ordering.

Send us your Compass model year (and a photo of your old housing if you have one) on WhatsApp. We will confirm the JCPE thermostat elbow matches before payment — if it does not, we will tell you straight away.

Fitting notes

The cooling system must be drained before the old housing comes off, and the sealing face on the engine cleaned of old gasket material and corrosion. The new elbow bolts down evenly on its flange so the O-ring compresses uniformly all the way round.

After fitting, the system is refilled with the correct coolant, bled of air, and pressure-checked before the car goes back on the road. A careful first heat cycle and a level re-check the next morning are good practice with any housing replacement, including the JCPE thermostat elbow.

In the box

You get one thermostat elbow housing, exactly as shown in the product photos. The price for this part is ₹1,999.

Why buy from Partgin

Partgin confirms fitment by model or part photo on WhatsApp before payment, so you do not gamble on cooling-system parts. We accept COD and UPI and deliver pan-India to Compass owners, workshops and retailers.

Every listing is checked against the real part and its photos before it goes live. If the JCPE thermostat elbow is not the housing your car needs, we say so before you pay.

Frequently asked questions

Will this fit my Compass diesel?

No — this elbow is listed for the petrol Compass only. If you have a diesel, message us and we will check the correct housing for your car.

Does it come with the thermostat itself?

This listing is for the elbow / coolant outlet housing shown in the photos. If you also need a thermostat or gasket set, ask us on WhatsApp and we will confirm availability.

Should I replace anything else while fitting it?

Renew the O-ring/seal and use fresh coolant of the correct specification while the system is drained. Your workshop will handle the refill and bleed procedure.

Useful links: Shop All Parts · Car Parts

Reviews

There are no reviews yet.

Be the first to review “Jeep Compass Petrol Thermostat Elbow – Coolant Outlet Housing (JCPE)”

Your email address will not be published. Required fields are marked *

Confirm fitment on WhatsApp

Confirm the right part and current availability with our team.

Estimated delivery: 2–5 working daysSubject to availability and PIN code. Confirm delivery time on WhatsApp.
Not sure this fits your car?

Share your VIN / chassis number or existing part number on WhatsApp before ordering.

THE PARTGIN SERVICE

The right part. A clearer way to order.

Fitment assistance

Check your part number and vehicle details with our team.

Pan-India delivery

Confirm serviceability and delivery timing for your PIN code.

Final price, clearly shown

The price shown is the final selling price. Confirm fitment with our team before dispatch.

Personal parts support

Speak to Partgin directly on WhatsApp for help with your enquiry.